Hanna-instruments HI 96104 Uživatelský manuál stáhnout pdf (Strana 13)

• Press RANGE/GLP/ to change the range.

The range can be changed any time when the

instrument is in

measurement mode

The selected range is memorized and the selection

remaines unchanged at power off or when the

battery is removed.

The HI 96104 can measure pH when range P1 is selected, Free Chlorine when range P2 is

selected, Total Chlorine when range P3 and Cyanuric Acid when range P4 is selected. To change

the active range follow the procedure:

• Turn the meter on by pressing ON/OFF. The

display briefly shows all tags on.

• After startup, the range identification number is

displayed on the secondary LCD as P1, P2, P3 or

P4.

RANGE SELECTION

Code Parameter

P1 pH

P2 Free Chlorine

P3 Total Chlorine

P4 Cyanuric Acid

MEASUREMENT PROCEDURE

To compensate the meter for the sample turbidity or color, the measurement takes place in two

phases. First, the meter is zeroed using the unreacted sample. After the reagents are added the

reacted sample is measured.

Important note: Free and Total Chlorine have to be measured separately with fresh unreacted

samples if both values are requested.

• Turn the meter on by pressing ON/OFF.

The display briefly shows all tags on.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Žádné komentáře

Hanna-instruments HI 96104 Uživatelský manuál Strana 13